Outline

PEEK is dissolved molding crystalline resins. PEEK has the highest heat resistance (continuous use temperature of 250 ℃). Because of the high fatigue resistance, resistance to environmental postpone the occurrence of ovarian (no corrosive gas, without paying, less), Electric field of electronics, the aerospace sector under strict conditions, such as are used in applications requiring high mechanical properties stiffness and elongation at break, excellent impact resistance, large and extremely tough material.

Characteristic

-Continuous use temperature = 250℃

It is high temperature under continuous use.

-Exceptional chemical characteristics

Indicates excellent resistance to a wide range of chemicals for.

-UL standard 94 V-0

My combustible, jeobal ductility is excellent.

-Hydrothermal water vapor stable properties of

Of pressurized hot water of 250 ℃ / vapor properties change little after 3000 hours exposure.

-Superior radiation resistance

Excellent radiation stability.

-In a wide temperature range, excellent mechanical properties

High mechanical strength, fatigue, creep stress characteristics represents the characteristics. Suit

-FDA hygiene compliance

-Excellent electrical properties, weatherability

Applications

-KetronⓇ PEEK 1000

This product provides the highest elongation and toughness of all PEEK grades.

The newly available black PEEK 1000 is ideal for aesthetics-critical equipment components, as well as soft and inert seals.

-KetronⓇ PEEK CA30(30% Carbon fiber reinforcement)

The addition of carbon fiber increases the compressive strength and stiffness of PEEK and significantly decreases the expansion rate.

This allows PEEK-based products to optimize wear resistance and load resistance.

This grade has a better thermal conductivity than pure PEEK, so it has a lot of thermal dispersion on the bearing surface and improves the life and function of the bearing.

-KetronⓇ PEEK HPV (Bearing Grade)

Our new product, Ketron PEEK HPV with graphite, PTFE lubricants, and carbon fiber, has a very low coefficient of friction and provides the best cutting workability among all PEEK grades. The combination of low friction, wear resistance, high PV, low relative wear and excellent cutting workability makes it ideal for bearings used in extreme environments.

-KetronⓇ PEEK GF30 (30% Glass reinforcement)

The addition of glass fibers significantly lowers the expansion rate and increases the flexural modulus of PEEK.

This grade is particularly ideal for structural applications where strength, hardness or stability must be high above 300 ℉ (150°C).

Applications

-Precision parts, instrumentation parts·Various

-Plated semiconductor manufacturing equipment·equipment related parts

-Nuclear-related equipment

-Metal surface treatment related equipment, aircraft parts, auto parts·

-Parts of the various manufacturing lines for parts, piping hot water·steam valves, pumps

Standards

-PEEK Sheet

PEEK	Color	Thickness
	Natural	5, 6, 8, 10, 16, 20, 25, 30, 35, 40, 50

-PEEK Round Rods

PEEK Round Rods	Color	Diameter(Φ)
	Natural	5, 6, 8, 10, 12, 16, 18, 20, 25, 30, 35, 40, 45, 50, 56, 60, 65, 70, 75, 80, 90, 100, 120